The Deben Whisper 180 Air Rifle Silencer

Whilst barraging Rob, the extremely patient owner of R & B Sporting in Ross on Wye, with questions regarding guns I had no means of purchasing, I dodged being ejected for loitering and time wasting by purchasing a Deben Whisper 180 Silencer. I was attracted to it as it was not only very competitively priced at £40, but with it came three adapters that I knew could come in handy.

The rubber sleeve was also a nice feature which should protect it from damage as barrels tend to get poked through fences, thorns and barbed wire.

Unfortunately, when I whacked it on a Webley Raider, the POI (Point Of Impact) was dramatically changed so low that I not only ran out of scope adjustment, but also room to pack the scope! I ended up with the silencer obscuring half the sight picture and I still wasn't close!

Hmmmmmm

Now a 'moderator' will ordinarily lower your POI but certainly not to the degree I witnessed. It doesn't matter what Silencer you fit, if you find that a moderator adversely affects your shots and groups you can bet the farm its due to mis-alignment and/or the pellet clipping the interior.

The Whisper is thankfully beautifully simple in design and construction and I was able to strip it right down in seconds. Here's what I found... (Click on pics to enlarge)

Note Grandma's Hair Curlers!

From the end of the mod dropped a very neat pile of shavings. Consistent with my results, the damage was to the 'bottom' of the moderator thus knocking the pellets on the underside causing them to dip so low.

End Cap/Final Baffle - Look for  Ever So Slight 'Silver' Marks

Second To Last Baffle

I have currently removed the smaller metal baffle that sits inside the end cap. By peering through the Silencer its evident that the rings now appear aligned and that ever so slightly larger opening should cure my problem. Failing that, I will ream out the plastic internal baffles by just a smidgeon.

This issue has definitely not put me off this silencer though, as its name suggests, it really is whisper quiet and at £40 is, I believe, very good value for money. Now I've had it apart, will I attempt to make a replica using Grandma's Curlers? Hell yeah! Hopefully I can improve it too and sell it as the 'Gnat's Fart'...

I Like Guns!

They may not be air rifles but I admire the enthusiasm of this fellow gun addict!

Cometa Fenix 400s Pellet Test and Review

A brief review and in depth pellet test of the Cometa 400s Fenix Carbine in the .22 calibre, using RWS Superdomes, Bisley Magnums, AA Fields, Gamo PBA Platinums, H&N FTT, Accupells, SMK Spitfires, Napier Power Hunters, Milbro Jets, Daystate Li's and Falcon Accuracy Plus

BAM B40 .22 Titan Spring Adjustment and Accuracy Assessment

In order to wrestle the BAM/Titan XS combo down to within UK legal limits, it was necessary to collapse another coil. This is not something I have attempted before, but after a friend with a vice, a blow torch and a grinding wheel allowed me free rein in his workshop, I was very proud of the end result.

Straight after heating to cherry red and hammering.

Ground flat on the wheel.

A bit of polishing.

 

 The Titan End

 

 

My end!

 

 

With the recoil now tamed to level that allowed consistency, it was time to take her to the range and see what her favourite food would be.

 

 

 

 

 

 

Hands down, the winner was JSB Exact 15.9grain printing groups under a 5 pence piece at 35 yards.

 

 

It's all very well punching paper, but could the BAM perform in the field and put meat on my family's table?

 

(If sensitive to pictures of dead animals please do not view the pictures below)

 

http://i969.photobucket.com/albums/ae175/milegajo/BAM%20B40%2022/IMG-20130527-WA0000_zps9758542c.jpg

 

http://i969.photobucket.com/albums/ae175/milegajo/BAM%20B40%2022/IMG-20130527-WA0001_zpsb61e4a9d.jpg

 

http://i969.photobucket.com/albums/ae175/milegajo/BAM%20B40%2022/IMG-20130527-WA0004_zps0c014c54.jpg

 

http://i969.photobucket.com/albums/ae175/milegajo/BAM%20B40%2022/IMG-20130527-WA0003_zps7c727f86.jpg

 

 

Finally, as chance would have it, my hunting partner has just recently purchased...a full length  MK3 Air Arms TX200 in a MK2 Stock!!!

 



The BAM B40 side by side with the TX200

 

 







Do Mine Eyes Decieve Me!? - A Close Up Look at the Air Arms TX200/BAM B40 .22

I have known about the BAM B40 for a fair while now and curiousity dictated that I was destined to one day own one. Especially after having spent a year shooting the fabulous TX200 MK2 and MK3 in my book : 'The Airgun Hunters Chronicles'.

The ONLY place I managed to find that claimed to sell them, was a model shop and RFD whose website listing advertised 'Out Of Stock' for nigh on a year, I was pleasantly surprised yesterday to see that one had magically appeared in the stock display!

I was there like a shot!

From the reaction I got, even the vendor was surprised they had one. After a short wait whilst the warehouse was combed, a battered box was presented (never a good omen). Sure enough, inside the box seated in tattered polystyrene, was what looked very much like a hybrid MK2/MK3 TX200. The action is a MK3 without doubt. The stock a MK2 without the chequering. That is the only discernible difference I could make out.
Upon inspection, this gun could not be described, and certainly not be sold as, 'new'.

Marks to the underside of the stock and a shallow dent, light damage to the cheek comb, and a smidgeon of rust around the plastic plug on the underside of the baffle/barrel.
When I released the underlever, the cocking arm dropped a quarter of its travel indicating a very short spring.
Rather quickly, the seller knocked off a chunk of the price. I pretended as though I was struggling to agree and pantomimed begrudging payment.

Well, I had a rarity in my hands for sure, but it was rough. I dared not fire the thing without stripping it down but I did relent in order to gain a point of reference. The chronograph read 520fps, only 8.8ft/lbs!

Click to Enlarge

I noticed that if I tilted the action left to right, the spring could be heard and felt following the pivot!

It was time to enter the belly of this beast!

Rather overkill, you only need probably 5 of those tools to strip a TX200/BAM B40 at most!

Removing the stock revealing a typically dry spring.

Along with a hint of rust throughout!

Some swarf induced marks to the internals.

A godawful bent and poorly finished spring.

Bloody lethal in fact!

The BAM B40 is an extraordinarily faithful reproduction of the Air Arms TX200.

The replacement spring was not only longer, it was too long with the rifle rendered 'Spring Bound' and unable to cock.

Ordinarily, I would not have chosen to employ a Non-OEM Spring, in this instance a Titan #10 Spring was the closest my local RFD had in stock. Though reasonably priced at £17.95, I would strongly urge buyers to NOT purchase these springs for their BAM B40/TX200. They are too long and if the rifle even cocks, the power warning on the packaging is a promise not an idle threat/sales ploy!
Thankfully, I had the required tools and know-how at my disposal to not only cut the spring down but suitably finish it. Not a procedure that requires expert knowledge, but it does demand extra tools. But that's for an article for another day.

Titan versus original spring. Three coils off (I'd recommend 4-5),

Click To Enlarge

She now runs smoothly at a healthier 11.8ft/lbs but I will be taking another coil or two off as even this is too close for comfort. The action will take time to bed in and most likely the power will increase over this period. I would prefer the rifle firing at 9.5-10.5ft/lbs to cater for this. If spring length became an issue, i.e. too short and rattling, a top hat and/or washers can be employed.

Do not attempt any of this without owning a chronograph of some description. There are Combro Chronographs available for approximately £40-£50 as well as the more elaborate Skans etc. 

So far, this Chinese made rifle is very very impressive to say the least. I read on another review that the author felt that if this is to be the norm of Far Eastern rifles, then Air Arms and Weihrauch should be worried. I agree, but from what I have witnessed of the latest offerings from these two airgun giants, their approach to tackle this threat has been to lower standards NOT raise them. Guns with springs as awful as this one have been reported from both houses, I've have had new Weihrauchs that have required as much finishing as Chinese rifles costing half the price! For shame!

This rifle has certainly made me question how much the TX200's price tag is really justified, especially when I see what the Americans have reported from them.



Well now we have power sorted, the next job will be to mount a scope and test the accuracy. Will this be the stumbling block?

Pellet test to follow!

Til next time my fellow addicts!

Where the XS19, .22 and Wasp reign Supreme.

04:45 on a cloudless morning, I found myself gazing out across green fields and blue skies. I'd like to report that I was stalking the hedgerows, but alas I was in the cab of a Fiat Ducato Maxi being whisked up the M6 to Carlisle. The main purpose was to collect a family member and his kit, but being the industrious chap I am, I also managed to arrange an air rifle sale with a buyer from Penrith on the same day, most fortuitous, though I was rather put out he attempted to knock me down a tenner! Ordinarily, I enjoy a good haggle, but not so much after 256 mile jaunt, saving the fellow £16 in postage.

Still grumbling to my companion, we journeyed on to our destination. It took minutes to load up, so with time to spare I convinced the chaps to take me to the local Registered Firearms Dealer. That turned out to be Geoff Wilsons Guns and Tackle in Carlisle City Centre.

My conversation with the young man behind the counter was, to me, very interesting indeed and most educational. I won't go too in depth so here are some main points I learned;

• Northern buyers prefer the .22 calibre so much so that .177 is a special order!
• The popularity and demand for shotguns in Carlisle has declined greatly whilst airguns has increased.
• Geoff Wilsons most popular selling gun was the BSA Lightning XL when BSA were selling the scope package, but since that deal was terminated and BSA increased their prices, the top spot has been snatched by the SMK XS19. I was further shown how the XS19 action is apparently shared across the Crosman Phantom and Benjamin Trail actions, the differences being barrels, stocks, and in the case of the latter, a gas ram power plant. But all essentially the same gun.
• The Webley Raider has been changed since I owned my Raider 10XS. It appears that since Highland Outdoors purchased the name, the Stock has been made less appealing (to my tastes), now more square, chunky and less comfortable. With an £80 price hike from £300-£380 and sales have dropped.
• Geoff Wilson did stock the Webley ValueMax, when the carbon fibre stock option was available. The assistant reported that due to the thin side pieces on the fore-end of all the stocks and their brittleness, many snapped. Customers returned the guns after finding that despite repeated re-greasing, the spring twang was returning and was unacceptable. (This I duly noted!) Not an issue they have had with their best-selling SMK XS19.

The two side pieces of The ValueMax's stock are reportedly prone to snapping.

I also got to handle a Weihrauch HW99s, a most impressive and point-able gun that has had a stock update which now includes an impression of 'Weihrauch' along the sides above the chequering on the fore-stock. A far better choice in my view if the funds are available, if not, according to Geoff Wilsons sales figures, then the SMK XS19 will suffice. As I pointed out, Woodfield GCP aka 'Welsh Willy' offers a plethora of after market products for the XS19 which currently do not exist for the ValueMax.

I tried to resist, but once I spotted it, I melted at the sight and had to have a hold of the TX200HC. Ohhh boy it felt good. I was slightly disconcerted to note that certainly on the model I held, the gorgeous fish scaled stock looked rather, unfinished. It may have been a trick of the eye, but the detail seemed rougher than I remember on my old full length. Perhaps hurried. I do hope I am mistaken, though my resolve to procure one in the future remains unshaken.

As a signal of my gratitude for the assistants time, I did as I imagine many browsers do and bought a couple of tins of pellets. I remembered that my .177 range lacked RWS Superdomes, and took a punt on a tin of Wasps (unsurprisingly another best seller in Carlisle at only £4.20 a tin).

 .177 Wasp pellets.

Close up of the .177 Wasp Pellet

The inferior quality of these pellets is so clear to me that I don't feel the need to photograph a Superdome for comparison.
I hope readers are getting the recurring message here. Just because it's cheaper, it doesn't mean its a better deal in most case. We all want to get our money's worth, and that's fine, but always buy the best you can afford and perhaps be prepared to save up if needs be. Just as you would be foolish to put poor quality oil in your car, I would always strongly advise buying good quality pellets to get the very best from your airgun.
To my eye, these Wasps look strikingly similar to SMK Spitfires, I have used them before and found them good only for 'plinking'. It is my opinion that if hunting, no animal deserves to be smacked by such an ill formed lump of lead as pictured.

But all is not lost for the ValueMax. As has been suggested by readers, the next step is to crack her open and spend the time and money on her that I would have saved if I had bought a quality rifle in the first instance!

An 'In The Field' Review Of The Webley ValueMax .177

Though I feared the land was, like Narnia, in the grip of winter forever, finally Spring has burst forth and too long I have delayed in reaping the fruits of this season of life and beginning.

First order of the day was to ensure the rifle and scope were zeroed. Having previously ascertained JSB Exacts to be the best performing pellet it was time to explore the guns other demands. Namely hold. Generally a springer must not be held too tight, it must be supported to allow it to recoil naturally. Due to the harsher recoil of the calibre, combined with this guns unrefined firing cycle, I have found that in order to tame muzzle flip, a slight grip must be maintained on the forestock.

A bullseye in the top right target signaled a successful 'acquaintance' session.

Confident now that Gun and shooter could put a pellet where it matters consistently, the time had come to visit my hunting grounds and break my prolonged spell of unintentionally enforced vegtarianism!

Accompanied by a good friend along with his superb HW100, the pressure and odds were piling on the outclassed Webley.
The contract was already out on squirrels, but the bonus to sitting under one particular tree where the squirrels frequent, is all around are pigeon 'sitty' trees!
Before we sat and waited, we had a recce;

It was during our tour of the hedgerows that one quality of the ValueMax really struck me. It was noticeable how unnoticeable the gun was. That synthetic lightweight stock may not absorb much recoil, but it certainly makes for an excellently weighted rifle that placed no strain at all upon arm or shoulder.

Not long after we holed up in our ambush positions, the ValueMax was presented with its first opportunity. A pigeon flapped into the hedge-line. Alas, neither the HW100, nor Webley could be brought to bear due to the multitude of twigs shielding our target. Unbelievably, the pigeon obligingly fluttered out from his sanctuary to alight dead ahead of my position.
BOIIIING!
Spring was Sprung and down the grey bird fell. The Weihrauch promptly read him the last rites, and dinner was assured.
Despite a thorough inspection, we could find no fatal trauma to the bird. I would ordinarily be puzzled if it were any other quarry, but not with these birds. They are something else, I am nigh on positive that our local variety are either titanium robotic hybrids or at least have evolved a layer of kevlar feathers! Mawders later hypothesized that the pellet did not strike at all, rather the sonic boom of the ValueMax's TWANG liquefied the birds brain. It's certainly an earful for the shooter!

Within 30 minutes we had our first squirrel in our sights. Thanks to some agile and deft manoeuvring on my part, the ValueMax secured the kill. Down the bandit tumbled, only to roll/twitch himself down a cavernous badger sett!

I didn't fancy sticking my arm down to retrieve my prize.

A bloodstained twig the only clue.

  A chance on a second provided further adrenaline surges, until the blighter sheltered in a hollow tree, but I was delighted with what I had as well as feeling cheated of proof of our efforts for the landowner.
What I did gain from this afternoon was a real appreciation for a rifle I have wanted to dislike.

A lightweight, accurate low cost carbine.

  The price tag invites derision. Like a foreign exchange student in the playground waiting to be bullied, yet when you actually engage with it, get to know it, you find out that the two of you get on surprisingly well, despite some challenges and rough edges.
I can definitely picture this rifle slung in the back of a tractor or the 4x4 of a gamekeeper. The synthetic stock able to withstand the elements and abuse. The action delivering the accuracy required to do the job.
It most certainly lacks the refinement of the top end springers, to get specific; the trigger will never win competitions, BUT, it releases the spring that sends the pellet flying that kills the prey and it does it consistently. Job done. There is also a smile factor to be considered, as well as the challenge of competently shooting something that isn't tuned to the point it may as well be a pre-charged pneumatic. It has soul, character irrespective of the fact it may resemble Darth Vader's Baguette.

It is not the best rifle in the world, nor do I really believe it to offer the maximum value for the money as its name suggests when it faces such stiff opposition from the second hand market. But as far as brand new guns that you can walk into most gun shops tomorrow and pick out of the rack, you can certainly do a lot worse! I bought it as an inexpensive platform to explore tuning, test pellets etc to be passed on when I lost interest in it, but with each session we spend together, I can see this gun becoming a permanent fixture in my armoury as a knockabout all rounder I can pick up at any moment. If I remove the scope, I will have an excellent close-medium range rifle I don't have worry about knocking off zero! No, it has not threatened my oath to the Hunting Goddess Diana that one day I will get my mitts on a TX200 HC, but until then, she'll do a cracking job I'm sure.

Now to buy one from R&B Sporting in .20!